From pre-design through occupancy, CalgreenCX delivers the technical oversight and certification management that government agencies require to meet California's most demanding sustainability mandates.
ASHRAE Cx
New Construction Commissioning
Independent verification that all building systems are designed, installed, and operating as intended — from schematic design through the warranty period.
Owner's Project Requirements (OPR)
Basis of Design (BOD) review
Commissioning plan and specifications
Construction-phase functional testing
Systems manual and O&M training
Warranty-period verification
ASHRAE Guideline 0, ASHRAE Guideline 1.1, California Title 24
RCx
Retro-Commissioning
Systematic investigation and optimization of existing building systems to restore or exceed original design performance and reduce energy consumption.
Facility assessment and benchmarking
Energy data analysis
Functional testing of existing systems
Findings and recommendations report
Implementation support
Measurement and verification
ASHRAE Guideline 0.2, California AB 1103
LEED AP BD+C
LEED Certification Management
Full-cycle LEED project administration — from credit strategy through GBCI submission — for new construction, major renovations, and existing buildings.
LEED credit strategy and scorecard
Documentation coordination and review
GBCI registration and submission management
Design and construction review responses
Certification letter and plaque coordination
LEED v4, LEED v4.1, LEED O+M
ASHRAE Level I–III
Energy Auditing
ASHRAE Level I, II, and III energy audits that identify capital improvement opportunities and support compliance with California energy mandates.
Utility data analysis and benchmarking
On-site systems assessment
Energy conservation measure (ECM) identification
Financial analysis and payback calculations
Implementation roadmap
ASHRAE Standard 211, California AB 1103
BECx
Building Envelope Commissioning
Specialized commissioning of roofing, glazing, waterproofing, and air barrier systems to prevent moisture intrusion and ensure thermal performance.
Envelope commissioning plan
Shop drawing and submittal review
Pre-installation conferences
Water infiltration testing
Thermal imaging surveys
Deficiency tracking and resolution
ASTM E1105, ASTM E783, NIBS Guideline 3
MBCx
Monitoring-Based Commissioning
Continuous fault detection and diagnostics using building automation data to sustain performance and identify operational drift over time.
BAS data integration and configuration
Fault detection and diagnostics (FDD) rules
Monthly performance reports
Prioritized maintenance recommendations
Annual performance benchmarking
ASHRAE Guideline 0.3, LEED O+M EAp
Our commissioning process
A structured, phase-by-phase approach that integrates with your project team from day one.
01
Pre-Design
Establish Owner's Project Requirements, define commissioning scope, and integrate Cx requirements into project specifications.
02
Design Review
Review design documents for compliance with OPR and applicable standards. Issue formal design review comments.
03
Construction
Conduct site observations, review submittals, develop functional test procedures, and coordinate pre-functional inspections.
04
Functional Testing
Execute functional performance tests on all commissioned systems. Document results and track deficiencies to resolution.
05
Closeout
Deliver final commissioning report, systems manual, and O&M training. Coordinate LEED documentation submission.
06
Warranty Period
Conduct seasonal testing, verify deferred test completion, and support facility staff during the first year of occupancy.
Ready to scope your project?
Our team reviews RFPs and scoping documents at no charge. Contact us to discuss your project requirements.